AUTOMATIC MAINS FAILURE CONTROL PANEL

DESCRIPTION:

Automatic mains failure (AMF) panels – also referred to as automatic transfer switch (ATS) panels – make the power switch to emergency standby generators in the event of a significant loss of mains power or total blackout. Without AMF panels, generators need to be operated manually and that can mean lost data, potential damage to electrical equipment and huge amounts of disruption.

AMF board and ATS panels monitor the incoming AC mains supply, activate the standby generator when mains power fails and make an automatic electrical transfer of the building’s load from the mains to the generating set. When the mains supply returns, the ATS panel controls a return to the mains supply and shuts down the generator after a suitable cooling run. High-tech electronic control systems enable a wide range of activities, including full mains synchronization where a no-break changeover is required. LED indication lamps indicate supply availability and load switching status throughout, making the system truly independent.

The panel changeover device provides electrical and mechanical interlocking and meets IEC/BSEN 60947-6-1 requirements.

These panels are used for controlling power supply in various industries like processing plants, hospitals etc. On the request of the clients, we customized these panels (both automatic and manual modes) to meet client-specific requirements.

Salient Features :

• Mechanically or electrically interlocked Contactors or MCCBs or ACBs.
• Equipped with a manual over-ride control
• Can be relay operated or PLC operated and elective features like auto start, auto changeover, no break change over, etc. are also available

Specifications :

• Material: Manufactured from 1.5/2mm Electro-Galvanized Steel Sheet.
• Finish: Standard RAL-7035. 
• Indoor, Cable entry from bottom.
• Micro-Processor Auto control & protection
• Easy to read high light LED display
• Modularity design, easy to install.
• Provide full mains and genset alarms signals shutdowns, status & failures.
• Direct operation on front panel with program settings auto-save in non-volatile random-access memory (NVRAM)
• Universal LED graphic interface.
• Optional USB / RS485 / Ethernet remote communication functions.
• Microprocessor controlled relay
• Auto / Manual modes of operation.
• Type tested assemblies as per IEC 61439- 2.
• Rated operating voltage up to 690V.
• Suitable for both internal & external mounting (Weather Proof with Canopy).
• Adequate spacing for incoming and outgoing cables.
• Panels for front or rear access to suit application.
• Degree of protection: IP 5x – IP65.
• Maximum safety & reliability.
• Custom design according to client requirements.

Options available:

• Stainless steel
• Galvanized steel
• Multi color option as per client requirement.